Water & Ice Vending
Here is how card and tap-to-pay work on an ice and water vending machine, from the first tap to the supply shutting off at the paid amount.
By Pro-Tech Systems Group, Akron, Ohio
Key takeaways
A payment and control panel lets an ice and water vending machine take cards and phones instead of coins and bills. After the customer pays, the panel turns the supply on. When the paid amount has been delivered, it turns the supply off.
For water, a flow meter certified legal for trade does the measuring, so you can bill by measured volume. The panel’s job is on and off. It does not regulate flow, because the pressure in your feed line sets the fill speed.
That split keeps things simple. Nothing dispenses until payment goes through, and delivery stops at the amount the customer paid for. For you, money in and product out stay tied together.
Pro-Tech Systems Group is an industrial automation and control system integrator based in Akron, Ohio. We design and build control panels and program programmable logic controller (PLC), human-machine interface (HMI), and supervisory control and data acquisition (SCADA) systems. The payment panel is made in Akron too.
This post is for private operators who sell water or ice. It covers what happens at the machine, what the panel has to match, and what to gather before you ask for a quote.
Here is one sale at an ice and water vending machine, start to finish. The sequence is the same for every customer.
01
The customer taps a contactless card or phone on the reader, or inserts a chip card. A regular customer can instead present an RFID card that you issued. Mobile wallets are supported too.
02
Once the payment goes through, or the owner-issued RFID card is accepted, the panel turns the supply on. The customer can start filling.
03
For water, the flow meter measures what is delivered. It is certified legal for trade, so you bill for the quantity actually delivered. Line pressure sets how fast it fills.
04
When the paid amount has been delivered, the panel turns the supply off. The sale is complete and the machine is ready for the next customer.
Five things need to line up before you order. Sort them out early and the quote goes faster.
Pick the methods you want to offer. The panel takes chip cards, tap-to-pay (contactless cards and phones), and mobile wallets. It also reads RFID cards that you issue, which suits account customers such as haulers.
For water, billing by volume rests on a flow meter certified legal for trade. NIST Handbook 44 gives the US specifications for commercial weighing and measuring devices, so it is a useful reference when you choose a meter.
The panel switches the supply, so look at the valve or other equipment that starts and stops your product. Gather what you know about it, and the engineering review will cover how it connects to the panel.
The enclosure is usually NEMA 4X, and every panel includes an internal heater and fan as standard. Mount it indoors or outdoors. Plan for power, mounting space and wire access with your contractor.
Payment authorization needs a communication path of its own. If you also want remote status on the station, look at network telemetry or tie the site into a SCADA system.
Here is how the two compare from the operator’s chair when you run an ice and water vending machine. For the city angle, see why cities switch from coin-op.
| What You Deal With | Coins and Bills | Card and Tap-to-Pay |
|---|---|---|
| Collecting cash | Someone has to empty the box, count the cash and carry it. Cash sits on site until you do. | No cash box to empty or carry. Payments are handled electronically. |
| Coin jams | Coin mechanisms can jam, and a jam can take the machine out of service until someone clears it. | No coin path to jam, so fewer moving parts at the payment point. |
| Vandalism | Coin slots and cash boxes attract tampering and break-in attempts. | No coin box to pry open and no stored cash to target. |
| Customer convenience | Customers need the right change in their pocket. | Customers tap a card or phone, or insert a chip card. No change needed. |
| Regular customers | Every sale stands alone, so setting up accounts for regulars is awkward. | Owner-issued RFID cards give regulars, such as haulers, an account that you control. |
| Billing by measured quantity | Selling by measured quantity depends on how the coin system was set up. | For water, a legal-for-trade flow meter measures delivery and the panel shuts the supply off at the paid amount. |
Water is the application in service today. If you want the product-page view, see our bulk water station page.
The same control system can be used for ice, grain, candy and other products sold by a measurable quantity. The program is tweaked for each application and instrument.
The panel itself stays familiar. It still takes the payment, turns the supply on, and turns it off at the paid amount. What changes is the program and the instrument it reads.
If you sell ice, the first step is a conversation about how the ice is measured and what the customer pays for. We build the program around that.
Operators who sell both ice and water should describe each product separately: what is sold, how it is measured, and what starts and stops delivery. That gives the engineering review what it needs.
Gather these items and a quote for your ice and water vending machine moves faster. Prices are set per project and depend on the instrumentation and the install site. When you are ready, request a quote or call 330-773-9828.
Here is the usual path once you decide to go ahead.
01
Share the checklist items through the contact page or by phone. We review the product, the measurement and the site, then come back with a quote.
02
Engineering submittals come before the build, and they count toward the lead time. Answer questions early and the schedule holds.
03
Lead time is 14 to 18 weeks including engineering submittals. The panel build alone is about 8 weeks. Line up your contractor around that schedule.
04
You or your contractor install the panel using the installation documentation Pro-Tech provides. An electrician and a plumber cover the electrical and plumbing sides.
05
Run test sales with each payment method you plan to offer. Confirm the supply turns on after payment and off at the paid amount, then open for customers.
The panel can be mounted indoors or outdoors. The enclosure is usually NEMA 4X, and every panel includes an internal heater and fan as standard.
Building an enclosure or a building around the station is the owner’s choice, and it is not part of the standard package. Decide early so your contractor can plan the site.
Card payments come with their own standards. EMVCo maintains the specifications behind chip and contactless payments, and the Payment Card Industry (PCI) Security Standards Council maintains card payment security standards. Your payment provider can walk you through how the equipment handles authorization and card data.
Test the payment side and the measurement side together before opening day. When both work, you have a station you can trust to collect the right amount and deliver the right amount.
Pro-Tech Systems Group builds payment and control panels in Akron, Ohio. Call 330-773-9828 or tell us about your station.
Pro-Tech’s payment and control panel turns the water supply on after payment and off when the paid amount has been delivered. The pressure in the feed line sets the fill speed.
The same Pro-Tech control system can be used for ice and other products sold by a measurable quantity. The program is tweaked for the application and instrument. Water is the application in service today.
Customers can pay with chip cards, tap-to-pay contactless cards and phones, and mobile wallets. The system also supports RFID cards issued by the station owner, such as cards for account holders like haulers.
No. Pro-Tech’s panel can be mounted indoors or outdoors, and every panel includes an internal heater and fan. The enclosure is usually NEMA 4X. Building an enclosure or building around the station is the owner’s choice.
Lead time for Pro-Tech’s payment and control panel is 14 to 18 weeks including engineering submittals. The panel build alone is about 8 weeks.
The customer or the customer’s contractor, such as an electrician or plumber, installs the panel. Pro-Tech provides installation documentation to guide the work.